Types of Transmission Towers in Saudi Electricity Company (SEC)

Types of Transmission Towers in Saudi Electricity Company (SEC) – NGSA Standards

The Kingdom of Saudi Arabia (KSA) is rapidly expanding its energy infrastructure projects to meet the growing demand for electricity. At the heart of this growth lies the high voltage transmission network, which delivers reliable power from generation plants to cities, industries, and remote areas.

To ensure safety and efficiency, the Saudi Electricity Company (SEC) follows strict NGSA (National Grid Saudi Arabia) standards for designing and selecting transmission towers. These lattice steel towers are engineered to withstand extreme desert conditions, high wind loads, and long transmission spans.

In this article, we will explore the different types of transmission towers in Saudi Arabia, their applications, and how they contribute to the power transmission system design.

High voltage transmission tower in Saudi Arabia desert under SEC NGSA standards

Why Transmission Towers Are Crucial in Power Grid Development

Every kilometer of transmission line construction requires careful planning. The right tower design ensures:

Stable support for 69kV, 230kV, and 380kV transmission lines.
Safety and reliability of the electrical grid in Saudi Arabia.
Prevention of cascading failures and costly outages.
Long-term durability, reducing transmission line maintenance cost.

Types of Towers in SEC NGSA Standards

According to SEC standards TES-P-122.05 (Part I – Lattice Steel Towers), different types of towers are used depending on voltage level, terrain, and transmission line deviation angle.

1. Tangent Tower with Suspension Strings

Deviation Angle: 0°–3° (69–230kV), 0°–2° (380kV)
Use: Straight sections of high voltage transmission lines.
Benefit: Cost-effective and widely used in power grid development.

2. Small Angle Tower with Tension Strings

Deviation Angle: 2°–10° (69–230kV), 2°–10° (380kV)
Use: Minor directional changes.
Benefit: Stronger than tangent towers, reducing risk of line swing.

3. Light Angle Tower with Tension Strings

Deviation Angle: 10°–30° (69–230kV), 10°–35° (380kV)
Use: Moderate turns in transmission line routing.
Benefit: Balances strength with economic design.

4. Medium Angle Tower with Tension Strings

Deviation Angle: 30°–45° (69–230kV), 35°–60° (380kV)
Use: Large directional changes in the network.
Benefit: Provides durability in complex terrains.

5. Heavy Angle Tower with Tension Strings

Deviation Angle: 45°–90° (69–380kV)
Use: Sharp line deviations and special terrain conditions.
Benefit: Built for maximum reliability under extreme loads.

6. Anchor Tower with Tension Strings

Deviation Angle: 0°–3° (69–380kV)
Use: Sectionalizing the line to avoid cascading failures.
Benefit: Increases power system reliability in Saudi Arabia.

7. Dead-End / Terminal Tower

Deviation Angle: 0°–30° (69–380kV)
Use: Start and end points of transmission line projects.
Benefit: Designed for maximum pulling force and stability.

8. Transposition Tower

Deviation Angle: 0°–2° (69–380kV)
Use: Rearranges conductors to balance electrical load.
Benefit: Improves power quality, reduces interference.

Key SEC Engineering Considerations

Deviation angles are calculated for ruling spans but may be adjusted with SEC approval.
Dead-End towers must handle both minimum and maximum entry/take-off angles.
For longer spans, special transmission tower designs are introduced.

Role of Transmission Towers in Saudi Arabia’s Energy Vision

Saudi Arabia’s Vision 2030 emphasizes investment in energy infrastructure projects. Robust transmission line towers play a central role by:

Ensuring grid reliability for industries and urban centers.
Supporting renewable energy integration from solar and wind farms.
Reducing overall transmission line construction cost through optimized designs.

Conclusion

The types of transmission towers defined by SEC NGSA standards are more than just steel structures – they are essential for powering the Kingdom’s growth. From tangent towers in long straight stretches to dead-end and heavy angle towers in challenging terrains, each design has a specific role in strengthening the Saudi power transmission system.

For engineers, contractors, and researchers, understanding these towers is key to future power transmission projects in Saudi Arabia.

Comments

PRIMARY SECONDARY AND TERTIARY FREQUENCY CONTROL IN POWER SYSTEMS

Primary, Secondary and Tertiary Frequency Control in Power Systems Author: Engr. Aneel Kumar Keywords: frequency control, primary frequency control, automatic generation control (AGC), tertiary control, load-frequency control, grid stability. Frequency control keeps the power grid stable by balancing generation and load. When generation and demand drift apart, system frequency moves away from its nominal value (50 or 60 Hz). Grids rely on three hierarchical control layers — Primary , Secondary (AGC), and Tertiary — to arrest frequency deviation, restore the set-point and optimize generation dispatch. Related: Power System Stability — causes & mitigation Overview of primary, secondary and tertiary frequency control in power systems. ⚡ Primary Frequency Control (Droop Control) Primary control is a fast, local response implemented by generator governors (dro...

Advantages of Per Unit System in Power System Analysis | Electrical Engineering

Advantages of Per Unit System in Power System Analysis In electrical power engineering, the per unit (p.u.) system is one of the most widely used techniques for analyzing and modeling power systems. It is a method of expressing electrical quantities — such as voltage, current, power, and impedance — as fractions of chosen base values rather than their actual numerical magnitudes. This normalization technique provides a universal language for system calculations, minimizing errors, simplifying transformer modeling, and enabling consistency across multiple voltage levels. Because of these benefits, the per unit system is essential in fault analysis, load flow studies, transformer testing, and short-circuit calculations . ⚡ What is the Per Unit System? The per unit system is defined as: Q u a n t i t y ( p u ) = A c t u a l V a l u e B a s e V a l u e Quantity_{(pu)} = \dfrac{Actual \ Value}{Base \ Value} Q u an t i t y ( p u ) = B a se ...

PHASOR DIAGRAM OF A TWO AXIS SALIENT POLE GENERATOR

Following phasor is phsor diagram of a two-axis salient pole generator . The following points apply to the drawing of phasor diagrams of generators and motors:- • The terminal voltage V is the reference phasor and is drawn horizontally. • The emf E lies along the pole axis of the rotor. • The current in the stator can be resolved into two components, its direct component along the ‘direct or d-axis’ and its quadrature component along the ‘quadrature or q-axis’. The emf E leads the voltage V in an anti-clockwise direction when the machine is a generator. Each reactance and resistance in the machine has a volt drop associated with it due to the stator current flowing through it. Consider a generator. The following currents and voltages can be shown in a phasor diagram for both the steady and the dynamic states. E the emf produced by the field current If . V ...

DISTRIBUTION STATCOM D-STATCOM

The D-STATCOM is basically one of the custom power devices. It is nothing but a STATCOM but used at the Distribution level. The D-STATCOM is a voltage or current source inverter based custom power device connected in shunt with the power system. It is connected near the load at the distribution systems. The key component of the D-STATCOM is a power VSC that is based on high power electronics technologies. Basically, the D-STATCOM system is comprised of three main parts: a VSC, a set of coupling reactors and a controller. The basic principle of a D-STATCOM installed in a power system is the generation of a controllable ac voltage source by a voltage source converter (VSC) connected to a dc capacitor (energy storage device). The ac voltage source, in general, appears behind a transformer leakage reactance. The active and reactive power transfer between the power system and the D-STATCOM is caused by the voltage difference across this reactance. The D-STATCOM is connected in shunt w...

ADVANTAGES AND DISADVANTAGES OF CORONA EFFECT IN TRANSMISSION LINES | ELECTRICAL ENGINEERING GUIDE

Advantages and Disadvantages of Corona Effect in Power Systems In high-voltage overhead transmission lines , the corona effect plays a critical role in system performance. Corona occurs when the air around a conductor becomes ionized due to high electric stress. While often seen as a drawback because of power losses and interference , it also provides certain engineering benefits . This article explains the advantages and disadvantages of corona effect in detail, with examples relevant to modern electrical power systems. ✅ Advantages of Corona Effect Increase in Virtual Conductor Diameter Due to corona formation, the surrounding air becomes partially conductive, increasing the virtual diameter of the conductor. This reduces electrostatic stress between conductors and minimizes insulation breakdown risks. Related Reading: Electrostatic Fields in High Voltage Engineering Reduction of Transient Surges Corona acts like a natural cushion for sudden ...

DC GENERATORS

Principle: An electrical generator is a machine which converts mechanical energy into electrical energy. The energy conversion is based on the principle of the production of dynamically induced emf, where a conductor cuts magnetic flux, dynamically induced emf is produced in it according to Faraday’s Laws of electromagnetic Induction. This emf causes a current to flow if the conductor circuit is closed. Hence, two basic essential parts of an electrical generator are (i) a magnetic field and (ii) a conductor or conductors which can so move as to cut the flux. The following figure shows a single-turn rectangular copper coil rotating about its own axis in a magnetic field provided by either permanent magnets or electromagnets. The two ends of the coil are joined to two slip-rings ‘a’ and ‘b’ which are insulated from each other and from the central shaft. Two collecting brushes (of carbon or copper) press against the slip-rings. Their function is to collect the current induced in the coi...

Operation of Thyristor Controlled Series Capacitor (TCSC): Mechanism and Working Principles

Introduction In modern power systems, maintaining voltage stability and optimizing power transmission is crucial. One of the most effective FACTS (Flexible AC Transmission System) controllers for this purpose is the Thyristor Controlled Series Capacitor (TCSC) . TCSC dynamically adjusts line impedance , allowing for enhanced power flow, transient stability improvement, and subsynchronous resonance (SSR) mitigation . Unlike conventional fixed series capacitors, TCSC uses thyristor-controlled switching to regulate the compensation level in real-time, ensuring grid reliability and efficiency . In this article, we will explore: ✅ The working principle and internal structure of TCSC ✅ Modes of operation and impedance control mechanisms ✅ How TCSC enhances power system efficiency and stability Understanding the Thyristor Controlled Series Capacitor (TCSC) What is a TCSC? A Thyristor Controlled Series Capacitor (TCSC) is a power electronic-based controller used in transmission systems to ...

ENGINEERING ARTICLES

Search This Blog