n'/> Skip to main content

CAUSES OF ELECTRICAL POWER OUTAGES

Interruptions in the supply of electricity to customers can occur at any hour of the day or night and can last from fractions of a second to many hours or even days. Interruptions can be caused by disturbances to or malfunctions of any of the three components of the power system: generation, transmission, or distribution. They can also be caused by the unavailability of adequate resources to supply the customer load. These two attributes of reliability are characterized by NERC as security and adequacy.

Data shows that over 90% of customer outages are caused by problems originating on the local distribution system. Although generation and transmission-related outages are less common than those related to the distribution system, they often have much more serious consequences because of the number of customers affected and the duration of the outage.



Disturbances can be initiated by:

1) External events such as:
  • Environmental factors, including wind, rain, lightening, ice, fire, floods, and earthquakes
  • Accidents such as cars hitting poles
  • Sabotage (sadly)
2) Internal events such as
  • Insufficient resources
  • Failure of equipment due to electrical or mechanical stresses
  • Operating errors or decisions
Lack of resources can be due to:

1) Insufficient generation caused by
  • Low load forecasts
  • Shortages of fuel due to supply disruptions or delivery/transportation problems
  • Opposition to the construction of required new generating capacity
  • Failure of equipment due to electrical or mechanical stresses poor planning
  • Excessive maintenance outages
  • Regulatory actions restricting the operation of power plants
  • Transmission constraints
  • Generation being retired because it is noncompetitive in the new competitive market
2) Insufficient transmission or distribution caused by:
  • Low load forecasts
  • Opposition to the construction of required new transmission or distribution lines
  • Failure of equipment due to electrical or mechanical stresses
  • Poor planning
  • Intentional outages required because of other infrastructure work, such as the widening of roads
The duration of the interruption will be affected by the severity of the disturbance, the power system facilities affected, the redundancy or reserve built into the system, and the preparedness of the involved operating entities to respond. Some interruptions are of very short duration because the disturbance is transient and the system self-corrects. Some interruptions, such as those caused by tornadoes or ice storms, damage significant portions of the system, requiring many days to restore service. When there are insufficient generation resources, the outages may be of a controlled and rotating nature. Their duration might be only during peak load hours.

The extent of the interruption will be determined by the initiating disturbances and the facilities affected. For example, cascading outages caused by a fault occurring when a system is operating above a safe level can involve many states, as can a widespread ice storm. Conversely, a distribution pole damaged by a car may affect only a few homes.

An increasingly important aspect of power system reliability is the quality of service or power quality. With the increasing importance of computers and new electronic communication procedures, imperfections in electric service become increasingly important to the customer. Such imperfections include:
  • Momentary interruptions
  • Voltages outside of acceptable limits
  • Voltage dips of very short duration
Protection against power quality imperfections can often be handled by the consumer. Pressure is mounting, however, for the supplier to improve quality. This raises the question of the responsibility for such improvements in a deregulated power industry with separate companies providing distribution, transmission, and power supply services

Comments

Popular posts from this blog

PRIMARY SECONDARY AND TERTIARY FREQUENCY CONTROL IN POWER SYSTEMS

Primary, Secondary and Tertiary Frequency Control in Power Systems Author: Engr. Aneel Kumar Keywords: frequency control, primary frequency control, automatic generation control (AGC), tertiary control, load-frequency control, grid stability. Frequency control keeps the power grid stable by balancing generation and load. When generation and demand drift apart, system frequency moves away from its nominal value (50 or 60 Hz). Grids rely on three hierarchical control layers — Primary , Secondary (AGC), and Tertiary — to arrest frequency deviation, restore the set-point and optimize generation dispatch. Related: Power System Stability — causes & mitigation Overview of primary, secondary and tertiary frequency control in power systems. ⚡ Primary Frequency Control (Droop Control) Primary control is a fast, local response implemented by generator governors (dro...

Advantages of Per Unit System in Power System Analysis | Electrical Engineering

  Advantages of Per Unit System in Power System Analysis In electrical power engineering, the per unit (p.u.) system is one of the most widely used techniques for analyzing and modeling power systems. It is a method of expressing electrical quantities — such as voltage, current, power, and impedance — as fractions of chosen base values rather than their actual numerical magnitudes. This normalization technique provides a universal language for system calculations, minimizing errors, simplifying transformer modeling, and enabling consistency across multiple voltage levels. Because of these benefits, the per unit system is essential in fault analysis, load flow studies, transformer testing, and short-circuit calculations . ⚡ What is the Per Unit System? The per unit system is defined as: Q u a n t i t y ( p u ) = A c t u a l   V a l u e B a s e   V a l u e Quantity_{(pu)} = \dfrac{Actual \ Value}{Base \ Value} Q u an t i t y ( p u ) ​ = B a se   ...

PHASOR DIAGRAM OF A TWO AXIS SALIENT POLE GENERATOR

Following phasor is phsor diagram of a two-axis salient pole generator . The following points apply to the drawing of phasor diagrams of generators and motors:- • The terminal voltage V is the reference phasor and is drawn horizontally. • The emf E lies along the pole axis of the rotor. • The current in the stator can be resolved into two components, its direct component along the ‘direct or d-axis’ and its quadrature component along the ‘quadrature or q-axis’. The emf E leads the voltage V in an anti-clockwise direction when the machine is a generator. Each reactance and resistance in the machine has a volt drop associated with it due to the stator current flowing through it. Consider a generator. The following currents and voltages can be shown in a phasor diagram for both the steady and the dynamic states. E                      the emf produced by the field current If . V    ...

DISTRIBUTION STATCOM D-STATCOM

The D-STATCOM is basically one of the custom power devices. It is nothing but a STATCOM but used at the Distribution level. The D-STATCOM is a voltage or current source inverter based custom power device connected in shunt with the power system. It is connected near the load at the distribution systems. The key component of the D-STATCOM is a power VSC that is based on high power electronics technologies. Basically, the D-STATCOM system is comprised of three main parts: a VSC, a set of coupling reactors and a controller. The basic principle of a D-STATCOM installed in a power system is the generation of a controllable ac voltage source by a voltage source converter (VSC) connected to a dc capacitor (energy storage device). The ac voltage source, in general, appears behind a transformer leakage reactance. The active and reactive power transfer between the power system and the D-STATCOM is caused by the voltage difference across this reactance. The D-STATCOM is connected in shunt w...

ADVANTAGES AND DISADVANTAGES OF CORONA EFFECT IN TRANSMISSION LINES | ELECTRICAL ENGINEERING GUIDE

Advantages and Disadvantages of Corona Effect in Power Systems In high-voltage overhead transmission lines , the corona effect plays a critical role in system performance. Corona occurs when the air around a conductor becomes ionized due to high electric stress. While often seen as a drawback because of power losses and interference , it also provides certain engineering benefits . This article explains the advantages and disadvantages of corona effect in detail, with examples relevant to modern electrical power systems. ✅ Advantages of Corona Effect Increase in Virtual Conductor Diameter Due to corona formation, the surrounding air becomes partially conductive, increasing the virtual diameter of the conductor. This reduces electrostatic stress between conductors and minimizes insulation breakdown risks. Related Reading: Electrostatic Fields in High Voltage Engineering Reduction of Transient Surges Corona acts like a natural cushion for sudden ...

DC GENERATORS

Principle: An electrical generator is a machine which converts mechanical energy into electrical energy. The energy conversion is based on the principle of the production of dynamically induced emf, where a conductor cuts magnetic flux, dynamically induced emf is produced in it according to Faraday’s Laws of electromagnetic Induction. This emf causes a current to flow if the conductor circuit is closed. Hence, two basic essential parts of an electrical generator are (i) a magnetic field and (ii) a conductor or conductors which can so move as to cut the flux. The following figure shows a single-turn rectangular copper coil rotating about its own axis in a magnetic field provided by either permanent magnets or electromagnets. The two ends of the coil are joined to two slip-rings ‘a’ and ‘b’ which are insulated from each other and from the central shaft. Two collecting brushes (of carbon or copper) press against the slip-rings. Their function is to collect the current induced in the coi...

Operation of Thyristor Controlled Series Capacitor (TCSC): Mechanism and Working Principles

Introduction In modern power systems, maintaining voltage stability and optimizing power transmission is crucial. One of the most effective FACTS (Flexible AC Transmission System) controllers for this purpose is the Thyristor Controlled Series Capacitor (TCSC) . TCSC dynamically adjusts line impedance , allowing for enhanced power flow, transient stability improvement, and subsynchronous resonance (SSR) mitigation . Unlike conventional fixed series capacitors, TCSC uses thyristor-controlled switching to regulate the compensation level in real-time, ensuring grid reliability and efficiency . In this article, we will explore: ✅ The working principle and internal structure of TCSC ✅ Modes of operation and impedance control mechanisms ✅ How TCSC enhances power system efficiency and stability Understanding the Thyristor Controlled Series Capacitor (TCSC) What is a TCSC? A Thyristor Controlled Series Capacitor (TCSC) is a power electronic-based controller used in transmission systems to ...