Power engineering deals with the generation, transmission and distribution of electricity as well as the design of a range of related devices. These include transformers, electric generators, electric motors and power electronics.
In many regions of the world, governments maintain an electrical network that connects a variety electric generators together with users of their power. This network is called a power grid. Users purchase electricity from the grid avoiding the costly exercise of having to generate their own. Power engineers may work on the design and maintenance of the power grid as well as the power systems that connect to it. Such systems are called on-grid power systems and may supply the grid with additional power, draw power from the grid or do both.
Power engineers may also work on systems that do not connect to the grid. These systems are called off-grid power systems and may be used in preference to on-grid systems for a variety of reasons. For example, in remote locations it may be cheaper for a mine to generate its own power rather than pay for connection to the grid and in most mobile applications connection to the grid is simply not practical.
Today, most grids adopt three-phase electric power with an alternating current. This choice can be partly attributed to the ease with which this type of power can be generated, transformed and used. Often (especially in the USA), the power is split before it reaches residential customers whose low-power appliances rely upon single-phase electric power. However, many larger industries and organizations still prefer to receive the three-phase power directly because it can be used to drive highly efficient electric motors such as three-phase induction motors.
Transformers play an important role in power transmission because they allow power to be converted to and from higher voltages. This is important because higher voltages suffer less power loss during transmission. This is because higher voltages allow for lower current to deliver the same amount of power as power is the product of the two.
Thus, as the voltage steps up, the current steps down. It is the current flowing through the components that result in both the losses and the subsequent heating. These losses, appearing in the form of heat, are equal to the current squared times the electrical resistance through which the current flows.
For these reasons, electrical substations exist throughout power grids to convert power to higher voltages before transmission and to lower voltages suitable for appliances after transmission.
Components
Power engineering is usually broken into three parts:Generation
Generation is converting other forms of power into electrical power. The sources of power include fossil fuels such as coal and natural gas, hydropower, nuclear power, solarpower, wind power and other forms.
Transmission
Transmission includes moving power over somewhat long distances, from a power station to near where it is used. Transmission involves high voltages, almost always higher than voltage at which the power is either generated or used. Transmission also includes connecting together power systems owned by various companies and perhaps in different states or countries. Transimission includes long meduim and short lines.
Distribution
Distribution involves taking power from the transmission system to end users, converting it to voltages at which it is ultimately required.